BTicino i.MX6DL

This tutorial will show the detail usage of BTicino i.MX6DL Mamoj board with respective mainline projects.

Hardware Access

BSP Building

Image building need host to ready with all necessary tools ready, refer here

U-Boot

$ git clone https://github.com/openedev/u-boot-amarula.git
$ cd u-boot
$ git checkout bticino origin/bticino
$ make imx6dl_mamoj_defconfig && make

Linux

$ git clone https://github.com/openedev/linux-openedev
$ cd linux-openedev
$ git checkout bticino origin/bticino
$ ARCH=arm make imx_v6_v7_defconfig
$ ARCH=arm make LOADADDR=0x10008000 uImage dtbs

Buildroot

Boot

USB SDP

More info at, u-boot/doc/README.sdp

  1. Clone imx_usb_loader

$ git clone git://github.com/boundarydevices/imx_usb_loader.git
$ cd imx_usb_loader
$ make
  1. Build the BSP and copy SPL, u-boot-dtb.img in imx_usb_loader directory

  2. Put the board in “Serial Download Mode”

  3. Plug-in USB-to-Serial and USB OTG cables to Host and Turn-on board

  4. Identify VID/PID using lsusb

Bus 001 Device 010: ID 15a2:0061 Freescale Semiconductor, Inc. i.MX 6Solo/6DualLite SystemOnChip in RecoveryMode

  1. Update the conf files

    imx_usb.conf

    0x15a2:0x0061, mx6_usb_rom.conf, 0x0525:0xb4a4, mx6_usb_sdp_spl.conf
    

mx6_usb_rom.conf

mx6_usb
hid,1024,0x910000,0x10000000,512M,0x00900000,0x40000
SPL:jump header2

mx6_usb_sdp_spl.conf

mx6_spl_sdp
hid,uboot_header,1024,0x910000,0x10000000,512M,0x00900000,0x40000
u-boot-dtb.img:jump header2
  1. Launch the loader

$ ./imx_usb
  1. Identify board booting on serial

U-Boot SPL 2018.03-rc3-00114-gcd9c6d25c1-dirty (Mar 08 2018 - 00:26:48 +0530)
Trying to boot from USB SDP
SDP: initialize...
SDP: handle requests...
Downloading file of size 344342 to 0x177fffc0... done
Jumping to header at 0x177fffc0
Header Tag is not an IMX image

U-Boot 2018.03-rc3-00114-gcd9c6d25c1-dirty (Mar 08 2018 - 00:26:48 +0530)
CPU:   Freescale i.MX6DL rev1.3 996 MHz (running at 792 MHz)
CPU:   Extended Commercial temperature grade (-20C to 105C) at 49C
Reset cause: POR
Model: BTicino Mamoj board
DRAM:  512 MiB
MMC:   FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Net:   eth0: ethernet@02188000
Hit any key to stop autoboot:  0

eMMC

Normal Mode

Falcon Mode

Secure Boot

U-Boot Accessing Peripherals

eMMC

FEC

Build the BSP and Setup host tftp server from here

=> setenv ethaddr 00:01:02:03:04:05
=> setenv serverip 10.39.66.9
=> setenv ipaddr 10.39.66.10
ping 10.39.66.9
Using ethernet@02188000 device
host 10.39.66.9 is alive
# tftpboot $loadaddr uImage
Using ethernet@02188000 device
TFTP from server 10.39.66.9; our IP address is 10.39.66.10
Filename 'uImage'.
Load address: 0x12000000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ####################################################
         969.7 KiB/s
done
Bytes transferred = 7437704 (717d88 hex)
# tftpboot $fdtaddr imx6dl-mamoj.dtb
Using ethernet@02188000 device
TFTP from server 10.39.66.9; our IP address is 10.39.66.10
Filename 'imx6dl-mamoj.dtb'.
Load address: 0x18000000
Loading: ###
         5.9 KiB/s
done
Bytes transferred = 32233 (7de9 hex)
# setenv bootargs 'console=ttymxc2,115200n8 rw root=/dev/mmcblk1p3'
# bootm $loadaddr - $fdtaddr
## Booting kernel from Legacy Image at 12000000 ...
   Image Name:   Linux-4.16.0-rc2-next-20180221-0
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    7437640 Bytes = 7.1 MiB
   Load Address: 10008000
   Entry Point:  10008000
## Flattened Device Tree blob at 18000000
   Booting using the fdt blob at 0x18000000
   Loading Kernel Image ... OK
   Loading Device Tree to 2ef6c000, end 2ef76de8 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.16.0-rc2-next-20180221-00004-gd4b3e85ef7dc (root@localhost.localdomain) (gcc versi
on 6.3.1 20170109 (Linaro GCC 6.3-2017.02)) #2 SMP Thu Mar 8 00:35:51 IST 2018

I2C

=> i2c bus
Bus 2:  i2c@021a8000
Bus 3:  i2c@021f8000
=> i2c dev 2
Setting bus to 2
=> i2c speed 400000
Setting bus speed to 400000 Hz
=> i2c probe
Valid chip addresses: 20 51 53
=> i2c md 53 0xff
00ff: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff    ................
=> i2c md 51 0xff
00ff: a8 08 40 50 09 43 46 52 42 18 80 8e ae a9 d0 53    ..@P.CFRB......S
=> i2c dev 3
Setting bus to 3
=> i2c speed 100000
Setting bus speed to 100000 Hz
=> i2c probe
Valid chip addresses: 08 40 48 4B
=> i2c md 08 0xff
00ff: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................

PFUSE100

=> pmic list
| Name                            | Parent name         | Parent uclass @ seq
| pfuze100@08                     | i2c@021f8000        | i2c @ 3
=> pmic dev pfuze100@08
dev: 0 @ pfuze100@08
=> pmic dump
Dump pmic: pfuze100@08 registers

0x00: 10 00 00 21 00 01 3f 01 00 7f 00 00 00 00 00 81
0x10: 00 00 3f 00 00 00 00 00 00 00 00 10 00 00 00 00
0x20: 2b 2b 2b 08 c4 00 00 00 00 00 00 00 00 00 2b 2b
0x30: 2b 08 c4 00 00 72 72 72 08 d4 00 00 2c 2c 2c 08
0x40: e4 00 00 2c 2c 2c 08 e4 00 00 6f 6f 6f 08 f4 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 00 00 00 00 00 00 48 00 00 00 10 06 1e 1e 17 10
0x70: 1a 1f 00 00 00 00 00 00 00 00 00 00 00 00 00

USB

Linux Accessing Peripherals

eMMC

FEC

I2C

USB