Olimex A33 OlinuXino

This tutorial will show the details of Olimex A33-OLinuXino board mainline support and other details like hardware, documentation, schematics are available at hardware and linux-sunxi

Hardware Access

Power supply: External 5V Jack USB OTG Cable, USB to TTL for debug

BSP Build

Image building need host to ready with all necessary tools ready, refer here

U-Boot

git clone git://git.denx.de/u-boot.git
cd u-boot
make A33-OLinuXino_defconfig && make

Linux

git clone git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
cd linux-next
make mrproper
ARCH=arm sunxi_defconfig
ARCH=arm make -j 4 zImage dtbs

Booting

SD Boot

Write Boot image

dd if=u-boot-sunxi-with-spl.bin of=/dev/mmcblk0 bs=8k seek=1

Now insert the card into A33-OlinuXino board, power on.