Orangepi Zero Plus2

Note

TL;DR - Mainline BSP bring-up guide for this board — covering U-Boot, Linux kernel, and Buildroot build from source with SD/flash boot, serial console access, and device tree configuration. - Part of Amarula Solutions’ upstream-first BSP documentation for Allwinner SoCs.

This tutorial will show the details of Orangepi Zero Plus2 board mainline support and other needed details, for more information about hardware and linux-sunxi

How do you access the hardware?

../../../_images/opi_zero_plus2.jpeg

Serial debug and Power connections

How do you build the BSP?

Manual Build

Image building need host to ready with all necessary tools ready, refer here

Below are the details of Image build for Orangepi Zero Plus2 board.

How do you build ATF?

$ git clone https://github.com/apritzel/arm-trusted-firmware.git
$ cd arm-trusted-firmware
$ make PLAT=sun50iw1p1 DEBUG=1 bl31
$ export BL31=/path/to/arm-trusted-firmware/build/sun50iw1p1/release/bl31.bin

How do you build U-Boot?

$ git clone git://git.denx.de/u-boot.git
$ cd u-boot
$ make orangepi_zero_plus2_defconfig
$ make

How do you build the Linux kernel?

$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
$ cd linux-next
$ make mrproper
$ ARCH=arm64 make defconfig
$ ARCH=arm64 make -j 4 Image dtbs

How do you build with Buildroot?

It’s easy to build entire system using buildroot and mainline supported orangepi zero plus2 already. See read this readme.txt for more info.

$ git clone git://git.busybox.net/buildroot
$ cd buildroot
$ make orangepi_zero_plus2_defconfig
$ make

How do you boot the system?

Tip

Need mainline BSP support for Allwinner platforms? Amarula Solutions provides U-Boot and Linux kernel mainlining, Buildroot/Yocto integration, and upstream-first development for Allwinner-based embedded products. Contact our BSP team